View Single Post
  #7   Report Post  
Old April 5th 05, 09:26 PM
Cecil Moore
 
Posts: n/a
Default

Wes Stewart wrote:
|Here's another way to look at things for multi-band non-
|resonant antenna lengths. The feedpoint impedance for
|that type antenna may vary from a low of about 50 ohms
|to a high of about 7500 ohms. To minimize SWR for all
|conditions, Z0 should equal the square root of those
|two values or 612 ohms. Given 600 ohm open-wire line,
|the SWR shouldn't go much above 13:1 for the open-wire
|line but may go as high as 150:1 for the coax. I don't
|know about you, but I would rather run with a maximum
|SWR of 13:1 rather than a maximum SWR of 150:1.

Who's talking about multiband non-resonant antennas?


Usually, anyone considering ladder-line for the feed
system. If the antenna is single-frequency with a 50
ohm feedpoint, there's not much of a reason to even
consider ladder-line except for very long runs.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----