Cecil:

Your work with EZNEC is greatly appreciated here.
Your configuration is for a horz ant and I am working with a
vertical--conversion is trivial.
"A picture is worth a thousand words..." has real significance here.
I am sure an analysis of your file will provide me with insight into the
workings of EZNEC and accelerate my learning curve!

THANKS!,
John

--
I would like to point out, I do appreciate the "Been there--done that!"
posts. Indeed, now your observations, comments and discourse should be
filled with wisdom--I am listening!!!
"Cecil Moore" wrote in message
...
Cecil Moore wrote:
John Smith wrote:
I cannot find a configuration on the gamma which brings the swr under
that figure...

As Richard H. said, find the point where the feedpoint
resistance is 50 + jXL ohms. That must occur somewhere.
Then tune out the reactance with a series capacitor.

I've used EZNEC to model a gamma-fed 33' 20m dipole at
40' made out of 0.5" aluminum tubing. With a gamma element
three feet long 6" below the 33' element and a series
Xc=122 ohms, it indicates a feedpoint impedance of
49+j0.3 ohms. The EZNEC file can be downloaded by
clicking on the link below.
--
73, Cecil http://www.qsl.net/w5dxp/GAM20DIP.EZ


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000
Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---