View Single Post
  #64   Report Post  
Old April 6th 05, 11:51 PM
John Smith
 
Posts: n/a
Default

Cecil:

Maybe I sent you the wrong .EZ file.
Anyway, I went back and pondered over your example, DUH!, it was obivious, I
simply had to splilt the driven element into two sections where the gamma
joined it!

Oh well, I might have made myself look stupid today, but not to such a great
extent that I won't be able to top that tomorrow!!!

Regards,
John

--
I would like to point out, I do appreciate the "Been there--done that!"
posts. Indeed, now your observations, comments and discourse should be
filled with wisdom--I am listening!!!
"John Smith" wrote in message
...
Cecil:

Here is an EZNEC file I am having a problem with, it is complaining about
wires 5 and 2 NOT meeting at an end or segment?
What corrects this?

Thanks in advance,
warmest regards,
John


--
I would like to point out, I do appreciate the "Been there--done that!"
posts. Indeed, now your observations, comments and discourse should be
filled with wisdom--I am listening!!!
"Cecil Moore" wrote in message
...
Cecil Moore wrote:
I knew I was confused about what you were trying to do.


John, I just realized what is wrong with gamma feeding a
1/2WL vertical at the base. The currents in each side of
the gamma feed section are pretty much out-of-phase so
they don't radiate (much). Conclusion: Gamma feeding a
1/2WL antenna at the base results in a field strength
comparable to a 1/4WL vertical and the minuscule amount
of gain is not worth the effort. Antenna gurus probably
already knew that but it just dawned on my concrete brain.

In much the same way a Zepp or a J-Pole is not a 3/4WL
radiator even though they are 3/4WL long, a gamma match
on a base-fed 1/2WL vertical doesn't yield a 1/2WL
electrical radiator. For this reason, the length of a
gamma match should be considerably less than a wavelength.
A good rule of thumb is probably in the ballpark of less
than ~6% of a wavelength. Your idea seems to require about
16% of a wavelength.

Moral: Physical length and RF electrical length are not
always the same.

What you are trying to do apparently requires a J-Pole
or Zepp approach, i.e. a physical 3/4WL antenna.
--
73, Cecil http://www.qsl.net/w5dxp

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+
Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption
=----