I normally use pieces of wood. In one end drill a hole to go over the mast.
At the other end cut the center section out leaving two ends with the inside
dimension slightly larger than the width of the ladderline insulator. Kind
of a letter "U". Cover with spar varnish, at the mast end use a drywall
screw through the piece of wood in to the mast. I normally predrill a 1/16"
hole before putting in the screw.

On the "U" end the inside of the "U" should be just wide enough so the ends
of the insulators on the ladder line fit snuggly into the "U". From one side
of the "U" put a drywall screw and let it go through and just tight against
the insulator to hold it in place. It is a lot easier to do than describe.

I normally mount mine at least 12" from the mast and use a board every 5
feet or so.

Just one solution, I am sure you will get many others.

Good Luck
Fred W4JLE

"ml" wrote in message
...
Been looking around for quite some time to find a plastic standoff for
my ladder line

i need to attach it to a regular 1 1/4 tv style mast and standoff about
4-6 inches and hold the ladderline


does anyone know of any SPECIFIC places, url's company's, etc where i
can get some?


thanks