View Single Post
  #1   Report Post  
Old April 26th 05, 02:29 AM
Woody
 
Posts: n/a
Default HT600/P200/M120/M1225/Vertex, more...

Ok, seems I forgot to continue
the last ad! So... starting over:

one P200 6ch, H43RFU7160AN, 146-170MHz or wider, very light and small FD
name engraved with cheap pen on side. 9/10 condition. have stickers intact,
include top dust covers, pocket regular charger, belt clip and older
battery.

one HT600 6ch, H44SUV7160CN, 450-470MHz or wider, like new DTMF front, case
and beltclip like new, very light name written on top over motorola sticker.
Should come off with solvent, no problem. 9.5/10 condition. have stickers
intact, include top dust covers, pocket regular charger, belt clip and older
battery.

one HT600 6ch, H43xxxxx, sticker worn off, 146-174 or wider, very good
condition with these exceptions: Missing dust cover and belt clip, fuse
blown. Professional engraving on front, Works great, no problems.

Will test/guarantee everything as usual, except the batteries.

$175 shipped for all, or
both VHF radios for $125 shipped
and UHF radio for $75 shipped.


M120 is he
http://www.sleepguides.com/mike/radios1.jpg

HT's are he
http://www.sleepguides.com/mike/radios1.jpg


M120 UHF, 40w:
Pic overexposed on purpose to bring out the flaws/fading and a dark screw,
but radio works great. Includes a mic, asking $125 programmed and shipped.
16pin logic board of course, M44GMC20A3AA, 40w.

Also shown are a Vertex VX3000 UHF 40w, an M1225 UHF 40w 24channel alpha,
and a Maxar 50 UHF 10w.

VX3000 has some hamfest-box-travel rash, but appears new, mic is still in
plastic and bracket included, missing bracket screws. $125 shipped. [Can't
program but RIB available on ebay for like $40]

M1225 includes mic and bracket but no screws, taken from my wife's car when
she got her ham ticket and I put her on VHF, $165 programmed and shipped.

Maxar 50 is rock bound, no mic, radio only, $50 shipped.

Everything checked out on the bench and guaranteed not DOA, with 36hr.
inspection, money back if not satisfied.

Feel free to email questions and thanks!
Randy