Hello All,

I have uploaded TrueTTY 2.50 to the main site and mirror:

http://www.dxsoft.com/truetty.zip
http://www.hamport.com/truetty.zip

--
Best regards,
Sergei


================================================== ========================
TrueTTY Versions History

V2.50
The "Show Omni-Rig Setup" button at the "Setup-Tuning" page was made.
This button can be used to activate Omni-Rig setup dialog.
Fine-tuning buttons "","","","" can be used for TX frequency changing
now.
TX frequency is changed by these buttons if right mouse button is used or
"Ctrl" key is pressed.
V2.40
A problem of frequency control of some RIG types was fixed.
When the "Setup-Interface-AFC at mouse click" option is selected
a fast AFC is made by click at spectrogram, but it is NOT made by click
at frequency ruler below now.
V2.39
The option "Follow VFOB by VFOA with offset" (at "Setup-Tuning" page)
was made. In this mode VFOB frequency is tuning to VFOA frequency with
given offset automatically. This option is useful if transceiver can not
use narrow-band filters in SSB mode. For example, you can receive in
CW or FSK mode (with VFOA) and transmit in SSB (with VFOB) now.
V2.38
A minor bug with TX marks drawing in waterfall mode was fixed.
The mode of automatic transceiver frequency control can be switched on at
"Setup-Tuning" page. In this mode transceiver radio frequency
is changed to consist RX frequency to TX frequency. Auto-tuning is made
after click on spectrogram. Tuning can be made by RIT or by VFO according
selected option. Take to attention that not every transceiver has
programmable RIT. In this case auto-tuning
by RIT is impossible. Tuning is made via Omni-Rig software interface
(see http://www.dxatlas.com/omnirig/ ). Hamport software
(http://www.dxsoft.com/en/products/hamport/ ) uses this interface also.
V2.37
The documentation was updated.
Some minor improvements were made, some minor bugs were fixed.
[...]