Bob Miller wrote:
Cecil Moore wrote:
You can certainly use an end-fed Zepp on other bands but
it won't be a Zepp on those other bands. The definition of
a Zepp is 1/2WL long end-fed with 1/4WL open-wire feedline.
What's the purpose of the 1/4 wave feedline wire that isn't attached
to the antenna? Is it kinda like a 1/4 wave elevated radial hoisted
into the air?
Assume the current in one wire into the 6000 ohm feedpoint is 0.1
amp and Z0 = 600 ohms. There's zero current flowing in the other
wire at the feedpoint.
The theory behind the Zepp is that there will be 1.0 amp in one
wire and 1.0 + 0.1 amp in the other wire at the transmitter. The
1/4WL section transforms the common-mode current problem from
100% at the feedpoint to about 10% at the transmitter.
--
73, Cecil
http://www.qsl.net/w5dxp
----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---