Electronics questions???
I can't figure out how they got the answers they did on these questions.
Can anyone out there help?
For 81 I get (c) for an anwer not (d) Maybe something to do with
it being a parallel circuit instead of a series. Didn't know they had
different
formulas.
I get (c) for 86. Same story.
I get 300 - j318 for (88)
Can't figure out the other two also.
81] What is the impedance of a network composed of a
100-picofarad capacitor in parallel with a 4000-ohm resistor, at
500 kHz? (Specify your answer in polar coordinates.)
a} 2490 ohms, /51.5 degrees.
b} 4000 ohms, /38.5 degrees.
c} 5112 ohms, / -38.5 degrees.
d} 2490 ohms, /-51.5 degrees.@@
86] What is the impedance of a network composed of a
400-ohm-reactance inductor in parallel with a 300-ohm resistor?
(Specify your answer in polar coordinates.)
a} 240 ohms, / 36.9 degrees.@@
b} 240 ohms, / -36.9 degrees.
c} 500 ohms, / 53.1 degrees.
d} 500 ohms, / -53.1 degrees.
88] What is the impedance of a network composed of a
0.01-microfarad capacitor in parallel with a 300-ohm resistor, at
50 kHz? (Specify your answer in rectangular coordinates.)
a} 150 - j159.
b} 150 + j159.
c} 159 + j150.
d} 159 - j150.@@
111] A 6 volt battery with 1.2 ohms internal resistance is
connected across two 3 watt bulbs. What is the current flow?
a} .57 amps.
b} .83 amps.@@
c} 1.0 amps.
d} 6.0 amps.
129] How many capacitors of 400 volts and 2.0 microfarads each
would be necessary to obtain a combination rated at 1600 volts
and 1.5 microfarads?
a} 10.
b} 12.@@
c} 14.
d} 16.
|