Hi Rob..
Thanks. I went ahead and got a copy of the SB101 tech and made a
copy of the schematic. I will now redraw the schematic into Protel and
attempt to come up with the resistor/capacitor values and include those
into the schematic. After that I will attempt to come up with an
alignment procedure that will, hopefully, usable to the heathkit nuts..
Look for the schematic to be posted at BAMA in the future..

Jim

In article k.net,
says...
Jim,

No first hand experience but if you go to BAMA ( bama.sbc.edu ) and download
the SB-101 technical description (it is in deja vu format) you will find the
LMO schematic on Heath manual page 151 (deja vu page 35). A description of
the function is found on Heath manual page 132 (deja vu page 14). Then if
you download the SB-100 alignment instructions, again from BAMA, you will
find a short instruction on adjusting the frequency shift control of the LMO
in the SB-100 alignment proceedures. This is all for the 6CB8 tube
version.

If you go to http://www.qsl.net/k5bcq/sb104/sb104.html you can find a great
Adobe Acrobat schematic of the SB-104A that includes a solid state LMO
schematic including the plug pinout. I have a separate JPEG of the LMO
clipped from this schematic if you have trouble. Whole schematic is 1.45
MB. JPEG is 640kB.

Hope that helps.

73, Rob Dunn, KD7HRN


"Jim Flanagan" wrote in message
tt.net...
Hello..
I have been looking 'high and low' for a copy of the LMO
schematic for the SB line of radios. I tried all of the Heath forums
that I am aware of. Does anyone know where there exists (not BAMA)
a schematic of the solid state (heck, I would take the tube version)
version of the LMO. I would have thought that after all these years
someone would show up with a copy of the schematic as well as the
alignment instructions. I realize that Heath never made public this
information, but I would have figured somebody would have reverse
engineered these units and documented what he/she discovered.
If I had a dead unit, I would take on the challeng and make
public my findings.

Anyone with any knowledge regarding aligning the units?

Thanks..

Jim Flanagan
wb5kye