View Single Post
  #52   Report Post  
Old June 14th 05, 10:00 AM
Reg Edwards
 
Posts: n/a
Default


Ian, not wishing to be classed amongst the old wives you have very
carefully avoided talking about "power radiated from feedlines". You
have shifted to using clamp-on ammeters.

But people who DO discuss things in such terms are unable to justify
the use of chokes by quantifying the power actually radiated and
setting limits on what power level is acceptable or is not acceptable.
If they can't measure or calculate the power level then they know
nothing about what they are are talking.

Refer to what Lord Kelvin said about measurements.

Can you suggest an acceptable level of amps as measured on a clamp-on
ammeter?
----
Reg, G4FGQ

----------------------------------------------------------------------
---------


"Ian White GM3SEK" wrote in message
...
Reg Edwards wrote:

They who discuss "power radiated from the feedline", yet are unable

to
measure (in watts) or calculate (in watts) the MAGNITUDE of the
effect, belong to a set of waffling old wives.


Those who take no precautions to prevent their feedline from

becoming
part of the antenna, belong to a set of people who don't even know

what
their antenna IS.

There's a part you call "the antenna", and another part you call

"the
feedline". Wishful thinking will not stop RF current from flowing
directly from one to the other.

How is it possible to decide whether or not a choke or balun is
needed, and where to locate it, unless the magnitude of what one

MIGHT
wish to prevent is known.

Try a clamp-on RF current meter, a little modeling... or even a

little
common sense.

There's a place called "the feedpoint" where the antenna and the
feedline are connected directly together. Might that be a good

location
for a choke to keep them separate? Yes, it almost certainly would.

Chokes may also be needed at other locations, but it's hard to

justify
anywhere else as your *first* choice. (The exception is the Carolina
Windom and similar antennas where part of the feedline is intended

to
radiate. But even there, they put a good choke at the point where

they
want RF currents on the feedline to stop.)

Queen Elizabeth 1 of England had the good sense to take a bath every

six
months "whether I need it or not". If you don't know whether your
feedline smells of RF, then follow her excellent advice and use a
choke.


--
73 from Ian GM3SEK 'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek