And what about ELI the ICE man ?
If you have a "L" then "E" leads "I", so I understand.
But suppose then you have another "L", and another, and another.
If "E" keeps leading "I" , then is "I" just slowing down for a cycle at the
"L" ?
-- in udder words - I'd druther keep the dummy load resistive *****
I wonder if that resistance wire in the toaster would work as a dummy load -
go ahead and try it - you can toast bread on the new dummy load.


"John Smith" wrote in message
...
Never mind, just dropped a so-239 on an old gallon can and wired it
up--seems to work great, but haven't checked the swr on the outside of
the can yet... grin

John

"John Smith" wrote in message
...
I need to come up with a dummy load for a 250+ watt xmitter.

IF I take two 100 watt wire wound resistors in parallel (for 50 ohms)
and put them in a can full of silicone oil and feed it though an
L-Match should it work?

Warmest regards,
John
--
Watching the cutting edge of yesterday replay--in virtual reality,
right before my eyes--in real time!
Thirty year old technology--wasn't it amazing?