Mainly I would like to use this on a 8 foot boom for somewhat portable use
feedline is 25 feet long


"Moto579" wrote in message
...
From 10 to 100 miles preferably the latter
My elevation is 1500 ft
Tower is at 5000ft
Clear line of site
Vertical polarity
Feeding to aYaesu FT-50rd 5 watt HT


"Fred W4JLE" wrote in message
...
How far away is the station you are trying to receive? What is it's
elevation, and yours? What obstacles are between you and the station of
interest? What are you feeding the antenna output to? What is the
polarity
of the signal from the distant station?

There are a gazillion yagi antenna designs. First let us know what you
are
trying to accomplish, that will determine the best design for your
particular need.

You have the necessary stuff for a solution, once the needs are defined.


"Moto579" wrote in message
...
I would like to build a yagi for 448 mhz rangr for home use I have a 12
foot
1x1" piece of cedar and some 10 gauge copper wire It measures 0.15625" I
think it is 10 gauge. Am I wasting my time? Also how do I use 75 ohm
line
as a feed line? All the plans I have found are for 50 ohm feedlines.
It
is
all I have for wire and living out in the boonies it is difficult to
travel
to pick up some 50 ohm.

I'm on a budget / disabled and would appreciate any help/
knowledge/links/donations on this.
I own the ARRL Antenna book 20th edition and find it to be a bit
overwhelming so far.


Cheers,
Ryan