View Single Post
  #4   Report Post  
Old June 26th 05, 01:01 PM
Frank Dresser
 
Posts: n/a
Default


"Pete KE9OA" wrote in message
...

[snip]

AM stations do not use any preemphasis so a deemphasis network after the
detector in your receiver is not required.


It's my understanding that there's no FCC standard for AM stations to
preemphasize their audio, but nearly all do in order to compensate for the
normal roll off. I have an old school high fidelity AM receiver, and AM
stations usually sound rather shrill on the "Hi-Fi" IF bandwidth position.

A quick google search brings up:

"In 1977 Orban Associates introduced "Optimod-AM." This unit contained a
high-slope receiver equalizer to pre-compensate for the highly rolled-off
radios of the time, "

http://www.bext.com/histproc.htm

"and Omnia exclusives like a pre-emphasis section placed behind the
multi-band limiters to create a more consistent, natural sound."

http://www.omniaaudio.com/am.htm


It is true that digital modes such as IBOC are being use on the MW band,

but
this is a totally different technique.

Pete


I brought up IBOC because Clear Channel wants all AM radio stations to limit
their audio bandwidth to 5 - 6 kHz. One of the reasons for the change was
given:

"1. Increased modulation efficiency. By eliminating the broadcast of the
high-frequency energy, we can increase the amount of energy that is in the
20 Hz to 5 kHz region. Let's not forget that due to pre-emphasis, higher
frequencies are boosted and will have a more profound effect on total
modulation than lower frequencies will."

http://www.rwonline.com/reference-ro...andwidth.shtml

I don't know if the IBOC stations use a different preemphasis on the analog
channel than the non IBOC stations.

Frank Dresser