"Pete KE9OA"
....it would be very difficult to have a standard preemphasis curve for AM
stations, because there are so my receivers with different characteristics
because of different I.F. bandwidths and different rolloff characteristics
in the audio chain.
______________

In the US, broadcast AM pre-emphasis is defined by a voluntary standard of
the Nat'l Radio Systems Committee. The tx audio response is a modified 75
us curve. The curve has an 8700 Hz break frequency to reduce adjacent
channel interference.

The NRSC standard expects the amplitude response of the narrow RF/IF
bandwidth of "typical" MW broadcast receivers to restore ~ flat system
response, not that a network complementary to that at the tx be added to
audio circuits following the 2nd detector. However that is not
prohibited -- it is just more expensive. Also, that approach to
implementing AM pre/de-emphasis would not be "backward compatible."

RF (retired broadcast field/systems engineer -- RCA & Harris Corp)

Visit http://rfry.org for FM transmission system papers.