Just hook it up and see if it works.
If not, change one the "thingys" and try again.
Repeat until it works.
end loop


"Cecil Moore" wrote in message
...
The first example was much too easy. How about this one?

---50 ohm feedline---+---300 ohm feedline---
Pfwd1=100w-- Pfwd2 not given--
--Pref1=0w --Pref2 not given

Given a Z0-match at point '+':
Solve for Vfwd1, Ifwd1, Vref1, Iref1, Pfwd2, Vfwd2, Ifwd2,
Pref2, Vref2, Iref2, including magnitudes and phase angles
for all voltages and currents. Source is unknown. Load is
unknown. Lengths of feedlines are unknown.

Who thinks this one is impossible to solve?
--
73, Cecil http://www.qsl.net/w5dxp


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet
News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000
Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---