"Opcom" wrote in message
...
Looking for one..

Kenwood TS-430S optional filter YK-88A (AM 6KHz bandwidth)

Need for shut-in listening to SW broadcasts and the occasional AM ham
transmission.

The standard Kenwood AM filter is really the SSB filter which is too
narrow for AM BC SWL.

I realize this is an old part (1986), but maybe there is one out there in
a '430 that is only used for listening to SSB or CW (AM TX does not
require this filter, it's only used for wideband RX), or maybe a junker
TS-430S available I can rob one from.

Filter is plainly labeled and can be seen by removing the top of the
radio. May be marked "Trio" or "Kenwood" and will be marked "AM FILTER
YK-88A".

center frequency = 8831.5 KHz
passband = 6KHz @ -6dB
attenuation bandwidth = 11KHz 60dB

Thank you, any help would be appreciated, Please decode my e-mail address
below by removing spaces and subtituting @ for AT and . for DOT (sorry
spam is a real issue.)

--
rest begards,
Patrick Jankowiak

Unless you specifically want a Kenwood part for restoration originality,
etc.
There is always International Radio (INRAD)
http://www.qth.com/inrad/

International Radio is a supplier of custom designed, high performance
quartz crystal filters for communications receivers and transceivers.
Filters are available for communications receivers and transceivers. This
includes ICOM, Yaesu, Kenwood, Drake, Heath, as well as special designs for
experimental work.

w9gb