On Sat, 14 Feb 2004 10:07:42 GMT, "Jim Chumbley"
wrote:

I would like to buy a Curtis Keyer. These were made during the early
1980s. They were usually sold as a kit, consisting of a PC board about 1
1/2" x 3", and the IC and parts to populate the board. I have most of these,
but have managed to lose the manual. I would prefer to buy the assembled PC
board with manual, but if you can help me with just the manual or a copy of
it, I would be very grateful.

Thanks a lot,
Jim Chumbley, N6UF

http://www.mfjenterprises.com/produc...did=CK-8045ABM has a
blurb aboiut the chip. Off that link is an application note at
http://www.hy-gain.com/man/mfjpdf/CK-8045ABM.pdf

HTH