Hi,
Two more questions:
1) Is there a risk of damaging a 12AX7 by testing it in the I-177?
I doubt it.
2) Is there an easy way to lower the voltage of the grid signal in an I-177?
A resistive voltage divider at the 5V transformer winding would
lower the signal to (say) 2.5V, which is just what Hickok did in some
later models. *Theoretically* that would halve the Gm readings, but
in practice, you'd have to measure some known-good tubes to get a new
bogey value.
73 , Alan
|