Ken,
I thought you were using a real tuner. Having it work with a 1000MP internal
tuner seems optimistic. What's your SWR on 10m ?
Tam/WB2TT
"Ken Bessler" wrote in message
...
Andy - I went through this with the group a few weeks ago. I
wound up winding 9 turns of rg8x coax around a 2-1/2" form
giving a coil with a 2-5/8" diameter (at the centerline of the coax).
I ended up with an inductance of 4.798 uH.
If you made the coil bigger it might be better - some on this
group expressed worries that such a tight coil would have
problems with the center conductor migrating to the inside
of the coil...... I simply used a form that I had.
After winding the coil, I glued it together with superglue,
dusted with baking soda (to set the glue instantly)......
BTW my antenna is a 153'2" dipole, wrapped around a
brick building - the antenna tunes 1.8-30 mhz with a Z11
tuner just fine. The antenna has a 1:1 swr at 2.390 mhz.....
Good luck!
Ken KG0WX
|