HP 8558B Analyser Problem - Help Needed
Hi All,
My HP8558B has developed a fault. Could anyone advise?
Up to about 4MHz the sweep consists of a distorted 0MHz peak then a sloping,
noise-free, baseline. Above 4MHz the analyser works fine At a Reference
Level switch setting of -30dB there is about one division of noise nad
signal appear as expected
The distortion of the 0MHz peak and the slope of the 0 to 4MHz section of
the sweep varies with the setting of the Reference Level Switch but the
actual gain settings seem to be correct, once you are above 4MHz. Also odd
single spikes appear in this region at different Ref Level settings
Anything else you need to know?
TIA
John
|