"David" wrote in
:
Here's are some other ideas from the metalworking newsgroup:
http://groups.google.com/groups?hl=e...-8&threadm=200
10319
151227.24203.00002372%40ng-fx1.aol.com&rnum=1&prev=/groups%3Fq%3Dflitz%
2Balu
minum%26hl%3Den%26lr%3D%26ie%3DUTF-8%26oe%3DUTF-8%26selm%3D200103191512
27.24 203.00002372%2540ng-fx1.aol.com%26rnum%3D1
But my favorite is Flitz
http://www.flitz.com/
-dave
"Steve Nosko" wrote in message
...
"Chuck Harris" wrote in message
...
No Spam wrote:
That will remove the evidence of corroson but will not remove the
cause
of
the corrosion.
Which is what? Air?
wheel polish should work just fine.
de ah6gi/4
Nah, aluminum is self protecting from air. It almost instantly
forms a layer of aluminum oxide, which is a sort of glass/ceramic.
Any corrosion you have on an aluminum device is due to a reaction
with an acid, base or salt. Many common houshold cleaners will
really eat up aluminum. So, if your aluminum is corroded, you need
to remove or neutralize whatever it was that was corroding the
aluminum. -Chuck Harris
Yes. This is what "anodizing" does. It grows a thick oxide
layer.
It is the most reactive metal, if I recall correctly.
Not exactly, but close. Magnesium is at the top of the list when
discussing corrosion.
In air, Aluminum instantly oxidizes at the surface, but this
obviously doesn't completely protect it.
This is true primarily for pure aluminum. If you see raw sheet metal
stock with an Alcad marking on it, it is aluminum alloy with a thin
plating of pure aluminum for protection.
However, I always thought that with time the oxide grows
thicker
and unevenly causing the pitting.
Since most aluminum products are alloys, there is a strong possibility
for galvanic corrosion any time it is not protected. Even common tap
water, with its mineral content, will aid the corrosion process. Google
"galvanic series" for more info. Here's a link to one table:
http://www.corrosionsource.com/handbook/galv_series.htm
Perhaps there are other mechanisms. Sulfur in the air can slowly
vulcanize rubber. Perhaps other oxidizers attack the aluminum as
well...
As stated above, most aluminum corrosion is galvanic in nature.