View Single Post
  #15   Report Post  
Old September 18th 05, 03:20 PM
 
Posts: n/a
Default

On Sat, 17 Sep 2005 23:18:03 -0500, "Harold Burton"
wrote:


"aRKay" wrote in message
...
In article ,
wrote:

The ringo ranger is vertical and most 6m stuff is horizontal. On skip
that may not hurt but for local it's very poor.

Allison
KB1GMX


Good response. I will not waste time messing with the old Ringo Ranger.


Don't give up on the vertical too quickly. I use both a 6 meter dipole and a
6 meter J-pole, 90% of my 6 meter contacts have been with the J-pole. Some
of the more experienced Hams of my acquaintance have told me that DX sort of
works outside of the normal vertical/horizontal polarization expectation. I
rarely have any occasion for a local 6 meter
contact. so am not able to speak about that aspect of the 6 meter band.

Harold
KD5SAK


Experience is that my vertical beam hears far less DX than the
horizontal. Occasionally I hear DX on the Vertical that is better
but on confirming the other end is also vertical. So it goes.
I do have vertical for those times where it may help. One thing I do
notice is the noise level of the vertical beam is far worse.

For local use the horizontal is usually 2-3 Sunits higher than the
vertical.

Allison
KB1GMX