On Wed, 28 Sep 2005 18:11:29 GMT, Bill Janssen
wrote:

STEVE TROOK wrote:

Go here I think you will find what you need 73
http://www.ham.dmz.ro/icom/ic706mk2g.php

wrote:

Hi all,
During LSB QSO's I receive comments that my audio sounds too sharp (and
high). It may be that the LSB is not produced (filtered) correctly. Can
anyone tell me where to find the Xtal and/or potentiometer to make
adjustments. It seems I can't find a good service manual anywhere.
73 Ben (email to )

Is there a way to correct the frequency from those menu items. I would like
to have a more accurate frequency on my VHF frequencies.

Or, is there an explanation for setting the frequency internally. so the
dial
would read correctly.

Thanks
Bill k7NOM

Yes. Pages 4-1 and 4-2 of the Service Manual detail exactly how to
set the PLL reference frequency to 60.000000 MHz. You will need a DVM
or O'Scope, an RF voltmeter and a counter with a frequency accuracy of
+/- 1 part per million.

Dick - W6CCD