On Sun, 02 Oct 2005 17:14:27 -0400, maxfoo wrote:

On Sun, 02 Oct 2005 14:57:28 -0400, TRABEM wrote:

If someone would make an inexpensive dispenser for distributing the
paste evenly, I think the paste would be viable for soldering and for
rework. Without a means to dispense small quantities of paste on
demand, the paste method is truly useless (IMHO).

This one uses 6" Alpha cartridges.
http://www.contacteast.com/product/g...parent_id=2647


Thanks max,

I sure don't like the looks of that 100 dollar dispenser. It looks big
and heavy and not sure why it needs to be so large. I was hoping
someone had something small and cheap that would be nice and light.

The model 850 looks like it could pump grease into ball joint on cars!
I don't need or want anything heavy and over powered like that.


Digi-key use to sell a cheap dispensing gun for $29.95 it had a very small
nozzle. don't now if they still carry it. We bought it 2 years ago...

I don't see anything like that in the Digikey or the Mouser catalog.

Can you give me a model number or the manufacturer of the one you
bought 2 years ago? Does it work well for dispensing small amounts for
SMT sized PCB pads?

Thanks,

T