View Single Post
  #9   Report Post  
Old October 15th 05, 11:12 PM
Sigurd Stenersen
 
Posts: n/a
Default Morse code learning software

Sigurd Stenersen wrote:
The easiest way to change the speed is to change the two numbers next
to the label "Speed" on the line below the menu.


To "clarifuse" a bit - if you want to set the speed to 25 WPM and use
standard timing, you have to change both numbers to 25.

The first number is the word speed, or overall transmit speed. The second
number is the character speed. If the numbers are equal, you're using
standard timing. If the first number is less than the second number, you're
using Farnsworth timing, which means characters are transmitted at the
higher speed with extra spacing inserted between characters and words to
slow the transmission down to match the lower number.

Oh, and you can change settings during a session (while Morse code is being
sent).


73 de LB3KB, Sigurd