"RHF" wrote in message
ups.com...
Sanjaya,

ABOUT - The AOR LA380 WideBand Active Loop Antenna
http://groups.yahoo.com/group/Shortw...a/message/6035

Since the AOR LA380 WideBand Active Loop Antenna accepts
a BNC Plug; it should already have a 50 Ohm Output Impedance
and therefore should not need any Matching Transformer. It can
be directly connected to your Radio Receiver.
http://www.aorusa.com/la380.html

Per Grove Enterprises the AOR LA380 Wideband Active Loop Antenna
has an Impedance of 50 Ohms
http://www.grove-ent.com/LA380.html

Per LA380 Leaflet (PDF Format) the Impedance is 50 Ohms
http://www.aorusa.com/la380.html

LA380 Operating Manual (PDF Format)
http://www.aoruk.com/direct/pdf/la380_manual.pdf

LA380 - Short Wave High Performance Table-Top Active Loop
Aerial, {Antenna} usable range : 10kHz - 500MHz
http://www.aoruk.com/direct/la380.htm

WHY NOT THE WELLBROOK ? ? ? ALA 1530 :
If you are in-fact considering the AOR LA380 WideBand Active
Loop Antenna : Then you should also be considering the
WellBrook Active Loop Antenna Model ALA 1530 150kHz-30MHz
which is a One Meter Diameter Aluminium Loop for Longwave,
Medium Wave and Shortwave.
http://www.wellbrook.uk.com/products.html
http://www.wellbrook.uk.com/ALA1530.html


hope this helps ~ iane ~ RHF