View Single Post
  #12   Report Post  
Old October 30th 05, 10:30 PM
Limited Viability
 
Posts: n/a
Default Outdoor Scanner Antenna

On Fri, 28 Oct 2005 14:30:45 -0400, Scott wrote:

What could I expect from an outdoor Antenna? I have nothing to attach
an antenna to on my roof. I'm newbie at this, and was curious as to
how hard it would be to install this


Just use a 1/4 wave VHF whip (unity gain on VHF, 1/2 wave gain on
UHF) and some decent quality RG6X quad shield satellite cable. Put
the whole thing on a short mast on your roof, use an "F to PL259"
adapter on the antenna end, and an "F to BNC" adapter on the scanner
end inside.

Should give you PLENTY of improved performance over a duck.

Discones are very low gain and wide band. They also bring in a LOT of
unwanted interference with intermod/etc.

You'll do fine with a VHF 1/4 wave as a base station antenna for
scanner use.

The impedence mis-match of the cable won't make a whole lot of
difference to the scanner.