Well, let me add or define this problem some. Amp on- transistor starts
getting real hot real quick and Will blow fuse.
Amp on and keyed, definate blown fuse. Checked biasing, all
resistors,diodes near and around problem transistor, all ok. Removed
the transistor and power up amp, no problem. Have not keyed the amp in
this state so dont know if it would blow the fuse. Tested trans with
dvm in diode check, get readings from base to emitter and base to
collector no matter how the test leads are applyed. Ill be the first to
admit I am no tech, but it seems to me its shorted internaly some how.
As I say, Im no tech, just learning. Any help I can get I can sure use.
Thanks again, Bill