View Single Post
  #20   Report Post  
Old November 30th 05, 04:02 AM posted to rec.radio.amateur.antenna
Mike Coslo
 
Posts: n/a
Default C. Crane's Twin Ferrite Antenna

W. Watson wrote:
Michael Coslo wrote:

W. Watson wrote:

I bought this antenna on a 30 day trial, and just got it about 12
hours ago. So far I'm not at all impressed. I live about 150 miles
from an AM station, at 810, in the SF/SJ Bay Area, which has a
marginal signal, but usually listenable. Putting a new PSU in a PC
about a month ago increased the noise in AM radios 70-100' from the
PC to an almost unacceptable level. I had hoped the antenna would
boost the signal enough to knock down the noise. There are times when
I can get a good signal from the station, but certainly less
frequently than before.




Any rf noise put out by the computer ps is going to be picked up
by your antenna as well as the radio station you are trying to hear.
So a better antenna (if your new one is indeed better) wil just pick
up stronger power supply noise. It's moslty a null situation.

What you need to do is get that power supply fixed or replaced

- 73 de Mike KB3EIA -

I think the only solutions to the PSU problem is to buy a much better
one. As I mention above, that's probably a losing proposition. I doubt
after 6 weeks they would take it back. It might be worth a try though.
Note my comment above to someone a few moments ago that this seems to be
a household circuit dependent problem. Another PC in the same room works
fine until I plug it into the socket that I first noticed the problem.



Hmmm, just maybe, you might be able to ditch it as a warranty item.
Dunno tho' as it will depend on the outfit that sold it to you. I don't
know if you are a Ham or not, but if you are, you might play the part 15
card, as they are required to not interfere. I suspect that a 160 meter
rig might catch the same interference.

It is kind of a drag though, since IIRC a noisy switcher Power supply
is hard to fix. Good luck!

- 73 de Mike KB3EIA -