Tarmo Tammaru wrote:
Amen to that. I turned down the power on my transmitter, and measured P
forward and P rev while feeding about 100 feet of unterminated 9913. I then
REMOVED the coax; i.e. there was nothing connected to the output side of the
meter. Still measured the same Pf and Pr. (Daiwa meter)

Of course, you were simply getting a same-cycle reflection. The reflected
wave model is consistent. If the open-circuit is at the transmitter terminal,
all the power is reflected immediately.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 100,000 Newsgroups - 19 Different Servers! =-----