Terry R2000SW...
This is a very good Article to Read:
"Is Your Coaxial Lead-In Actually an Antenna ?"
- by John H. Bryant with Bill Bowers, February 2001
http://www3.telus.net/7dxr/ircatech/snake.pdf#search='bryant%20lead%20in%20antenna
However, the suggestion about "TRYING" the Snap-Together
Ferrite Core is a first step and a beginning in what may be a
long journey toward less noise and more signal.
Tip - Try placing Two Snap-Together Ferrite Core 'on'
the Coax Cable from the Antenna to the Receiver :
RadioShack Catalog # 273-105
http://www.radioshack.com/product/in...tId=2103222&cp
* One about Three to Six Inches from the PL-259 Plug
going into the Radio.
* One about Three ot Six Inches from the PL-259 Plug
connecting to the Antenna.
That is also why I asked this Question :
"Question - What type - kind of Ground
do you have for the Receiver and Antenna ?"
keeping it simple and practical 'kisap' - cause iane ~ RHF