SETTING UP KENWOOD TM-V7A FOR PACKET/APRS USE

1. PUT 144.39 ON THE LEFT SIDE. (USA APRS frequency)
2. PUT FAVORITE REPEATER ON THE RIGHT SIDE.
3. PRESS "MNU" AND CLICK TO ITEM 15 "DATA TRANSFER".
4. PRESS THE "V" AND CLICK TO '.2' "DATA BAND".
5. PRESS "SET" AND TURN IT "ON".
6. PRESS "MNU". YOU WILL SEE THE WORD "DATA" OVER THE LEFT
(144.39) AND "PTT" OVER THE RIGHT.

TO DO VHF/VHF OR 2METER VOICE REPEATER AND PACKET AT THE SAME TIME:
1. PRESS THE RIGHT BAND SELECT BUTTON.
2. PRESS 'F' + [CONT.SEL.] (LITTLE BUTTON BETWEEN VOL CONTROLS).
3. MAKE SURE 'PM AUTO STORE' IS ON SO YOU DONT LOSE ALL SETTINGS
WHEN YOU TURN OFF THE RADIO. (SEE PAGE 39 OF THE MANUAL).
_____________________________
Below are the pinouts
______________________________

KENWOOD TM-V7A DATA JACK PINS:
1. PKD IS TX (MIC) AUDIO (connect to KPC-3 Pin #1- TX AUDIO)
2. DE IS GROUND (connect to KPC-3 Pin #9- GROUND)
3. PKS IS PTT (connect to KPC-3 Pin #3- PTT)
4. PR1 IS RX AUDIO (connect to KPC-3 Pin #5- RX AUDIO)

________________________________

KPC-3 PLUS DB-9 (if you have the KPC-3 original ... no change)

1- TX AUDIO
2- GPS DATA IN
3- PTT
4-
5- RX AUDIO 'TIP'
6- GROUND (GPS/RX-AUDIO)
7-
8-
9- GROUND FOR MIC

***************************************
In the 'old days' they called us hoods,
because we wore our faces like shrouds,
and never spoke.
****************************************