Good web page.....................I throw them on a network analyzer when I
want to measure them, but there are some pretty good ideas here.

Pete

"mike maghakian" wrote in message
...
check this page out:

http://www.radio-electronics.com/inf...electivity.php




"Michael Thorpe" wrote in message
news:43c4e407.4277000@news-server...
Amongst all these political propaganda posts, I wonder if there is a
little room for a technical question related to radio please?

If so, here goes:

How does one measure the IF filter shape factor in a shortwave radio?

I am technically minded and do have a signal generator, etc., but I am
not sure of the exact procedure. Do I get the audio level at the peak
frequency, then detune both sides off the peak for -3dB of the
demodulated audio, note down the width between these points, then
detune to obtain for -50dB of the demodulated audio, get the width at
these points, and then the ratio of the two widths is the filter shape
factor?

I would appreciate a link to the exact procedure if there is one
(don't seem to be able to find this in Google) or an expert advice
please.

I would also appreciate advice as to what actual values of filter
shape are considered poor, good, excellent, etc...

Thanks in advance,
Michael