Thread
:
PK232, DSP232, and F6FBB
View Single Post
#
14
July 3rd 04, 10:05 AM
Steve
Posts: n/a
In article ,
(Doz)
wrote:
I have both software installed - latest Winfbb and BPQ 4.08b (with
ll's) - onto a windows 95 osr2 box
Not used WinFBB, the last version I ran was 5.15, but hey, I'll give
anything a go ! ;-)
However... I don't have a clue on the routes... ports.. virtual or
otherwise!? The tnc is a tiny2 in kiss mode and can be accessed from
windows using Hyperterminal.
What are you seeing, it should be complete gibberish.???
BPQ
; For Version 4.08
;
;
; Configuration Options
;
BBS=1 ; INCLUDE BBS SUPPORT
NODE=0 ; INCLUDE SWITCH SUPPORT
;
Are you sure ???
I had mine set to NODE=1
PORT
ID=144.950 Mhz 1200 Baud
TYPE=ASYNC
PROTOCOL=KISS
IOADDR=3F8H
INTLEVEL=4
SPEED=4800
really...? 9k6 is the norm.
CHANNEL=A
QUALITY=10
MAXFRAME=2
TXDELAY=500
SLOTTIME=100
PERSIST=64
FULLDUP=0
FRACK=7000
RESPTIME=2000
RETRIES=10
PACLEN=120
ENDPORT
everything else looks in order. I'll load up mine and compare a little
later when I've had caffeine and nicotine ;-)
BTW, you DID compile the bqgcfg.txt didn't you ;-)
HTH
- Steve
Reply With Quote