Arie,

Thank you. I tried your suggestion to capture all the segments in a helix. The
first problem is "the edit option" is not always available. Sometimes the edit
is not available. Have you seen this? Anyway, it is not possible to use edit.
Control M does not work either.

Dan


Arie wrote:
Hello Frank and Dan,

red your discussions with interest. Some few answers:


The helix also appears with the axis normal to the edit page


Yes, you are correct. To get another orientation select XZ, YZ or XY
plane,
before creating the helix.


Have not figured out how to rotate it yet


Select all segments using Ctrl+A or select the required segments by
drawing
a rectangle around them and select 'Edit-Rotate/Move wires' on the
menu-bar.


Every once in a while the editor converts all my segments into wires. All of a
sudden the card file will jump from a few cards with segments to dozens of
cards with one segment


Hmmm, do not have an explanation for this yet. Did you change the
segmentation-
density between subsequent edit sessions ?


I wonder about the accuracy of the power calculations. They seem too high.


Please, let me know if you think you found an error. I would very much
like to
hear this,

Thanks for 'testing' and remarks,

Arie.