View Single Post
  #3   Report Post  
Old February 6th 06, 06:52 PM posted to rec.radio.shortwave
KA6UUP
 
Posts: n/a
Default LF Engineering H-800 antenna

Check with them on this.
I contacted both LF Eng. and Grove about this shortly after the LF 900
came out and they agreed to provide a BNC connector as an extra cost option.
73,
Chuck

Mark S. Holden wrote:
wrote:

There is now avaiable made by LF their H900 which has higher gain and
more resilience to local transmitters. It is available only thru Grove

http://www.grove-ent.com/antennas.html

Paul


Unfortunately, they don't seem to offer the option of having bnc
connectors instead of a permanently attached cable between the antenna
and the coupler.

LF Engineering offered this on the h-800 for another $20 or so, and I
thought it was a good idea.

I used to use an H-800 for my portable setup, and it was a nice antenna,
but using it as a portable meant the coax was stressed where it enters
the probe.