Want to replace old flat tv cable with better coax.
jg wrote:
Twinlead has less signal loss than coax so it's
preferred in reception areas where signal
strengths are low.
Should I be worried about this? Currently the twinlead only runs from
the top of the antenna to where it enters my house. About 40 ft. Then
I have coax in my crawl space for another 80 feet or so. 30 ft of
which is just coiled and wasted. Reception for local (Sacramento)
stations is pretty good. Reception for San Francisco stations is too
grainy to watch at times. My zip code is 95682. (So I should not
expect too much from San Francisco.)
If need be I can replace the existing twinlead with new twinlead.
Should I look into this?
jg
If you want the best weak signal reception (San Francisco) either use
new twinlead all the way from the antenna to the TV or new coax all the
way with an antenna amplifier too. You might want to consider an antenna
rotator if the local and distant stations are in different directions.
BTW- If you use twinlead, install it with a continuous twist along it's
length. Make several twists per yard. I know it's a pain to do this but
it helps to reduce the reception of noise from home applicances on the
twinlead.
|