I have a couple 6 channel public service radios that are in the 155Mhz
range. Some are synthesized and require cutting diodes to change the
frequency and that works out well.
But some are crystal controlled and with the cost and availability of
crystals it's cost prohibitive to re-crystal these radios. It looks like
these crystals are in the X9 mode so that puts them in the 16-16.5 MHz
range. I am considering building a VCO to inject a signal into the old
crystal socket to get around the crystal issue. Actually I figure a PIC to
program the PLL would be great. I'm just not sure what frequency to inject
into the old crystal socket. Should I build a 16mhz VCO or some harmonic?
Will injecting a signal into a crystal-less oscillator even work? I'm going
to use a ADF4110 PLL and a 16F89 PIC. Any suggestions for the VCO? Schematic
for a 16 MHz VCO?

Joe Loucka AG4QC



----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----