Go to the following location there is the complete directions on tying
the two together.

http://www.zerobeat.net/drakelist/2nt-hg10.html

73
Nels W0TUP


wrote:
I am trying to hook uo a Drake 2NT with a Heath HG10 VFO. I am using an
outboard power supply on the vfo. I am getting hum and chirp on the
signal. I have hooked the vfo up both for cathode keying and grid block
but same results ie hum/ chirp. Anyone running this same combo? Any
suggestions appreciated. Thanks-Lew K1NDV