Robert 11,
Ground Rod - How Deep ? - As Deep As You Can Get It !
Big Tough Jobs are made easier - - -
If they are done in small steps.
[ Installing a Ground Rod - One Day at a Time ! ]
1. Take a Post-Hole Digger and dig-down a foot
or two to start you Ground Rod Hole.
2. Add a Dry Mixture of 6 Oz Epson Salt and
3 Oz. Copper Sulfate to the Bottom of the Hole.
Then Wet (Soak) the earth (dirt) at the Bottom of
the Hole for a day or two to soften-up the ground.
3. Place your Ground Rod into the center of the
Bottom of the Hole and pound-away as much as
you can and then attach your Clamp and Wire.
4. Add a Dry Mixture of 6 Oz Epson Salt and
3 Oz. Copper Sulfate to the Bottom of the Hole.
Then Wet (Soak) the earth (dirt) at the Bottom of
the Hole for a day or two to soften-up the ground.
5. Come back in a day or two or may be a week and
Remove the Clamp and Wire and again pound-away
a little more. Re-Attach the Clamp and Wire.
6. Add a Dry Mixture of 6 Oz Epson Salt and
3 Oz. Copper Sulfate to the Bottom of the Hole.
Then Wet (Soak) the earth (dirt) at the Bottom of
the Hole for a day or two to soften-up the ground.
7. Come back in a day or two or may be a week and
Remove the Clamp and Wire and again pound-away
a little more. Re-Attach the Clamp and Wire.
REPEAT - The above steps as needed to get your
Ground Rod about Seven Feet (7') into the ground.
NOTE - Eventually you will have about 6" to 8" of
Ground Rod above the surface of the ground and
that is good enough.
8. Fill the Hole with a mixture of 50% of the
original soil and 50% Bentonite.
READ - Great Ground with Kitten Litter [ Bentonite ]
- by Guy Atkins on HCDX - August 10, 2000
http://www.hard-core-dx.com/nordicdx...bentonite.html
Bentonite is great for getting an excellent conductive ground.
http://groups.google.com/group/rec.r...ba5602d962b325
http://groups.google.com/group/rec.r...ba8bd01a08d34d
Here are a few Ground Rod - Grounding Messages
posted here on RRS with some useful information.
* Buried Copper Wire {Flexible} Ground Rod
without a Hard Rod
http://groups.google.com/group/rec.r...adcbeaaded1540
http://groups.google.com/group/rec.r...58bdfd784856c4
http://groups.google.com/group/rec.r...549154294a4d9b
* Transforming your simple Ground Rod into
a Ground Anchor : Is It Worth The Work ?
- You Decide !
http://groups.google.com/group/rec.r...31a1a89aa89026
http://groups.google.com/group/rec.r...81042ec0ce78e1
http://groups.google.com/group/rec.r...b69b219da2de33
* Grounds & Grounding = Five Topics for your Consideration
http://groups.google.com/group/rec.r...59ed4e60ef8b64
* Building a Solid Copper Ground Pipe {Tube}
with an Solid Iron Core. - Also - Water Drilling
a Solid Copper Pipe for a Ground Rod.
http://groups.google.com/group/rec.r...60795205262938
hope this helps - iane ~ RHF
..
All are WELCOME and "Invited to Join" the
Shortwave Listener (SWL) Antenna eGroup on YAHOO !
http://groups.yahoo.com/group/Shortwave-SWL-Antenna/
SWL ANTENNAS GROUP =
http://tinyurl.com/an6tw