On Thu, 13 Apr 2006 07:09:53 -0700, "Caveat Lector"
wrote:

Since aluminum is non magnetic, I would assume a mag-mount vertical would
not couple properly to a aluminum ground plane.

Thoughts ?

Put a steel plate below the aluminum so the magnet won't fall over.
Electrically, it should work on aluminum as the ground will still
conduct when the magnet touches the aluminum. If nothing else, the
capacitive connection through the base of the antenna should be about
the same as it is on the steel.

my thoughts
N4PGW
buck

--
73 for now
Buck
N4PGW