On Thu, 20 Apr 2006 19:22:17 GMT, "Cecil Moore"
wrote:

"John Ferrell" wrote:
I don't find the Helix feature in my copy of EZNEC+ V4.
I believe I can get the same results by inserting an appropriate load.
It will just be a little more cumbersome.

The helix feature is found under the Wires window under the create
menu. But it is somewhat complicated. A lumped inductance load
will get you started.

The problem with feeding an impedance of 1.2-j1400 ohms is
getting power into the antenna without dissipating most of it
in the matching network.

Not to worry. Ground loss will help with that problem.