Thread
:
antenna switch?
View Single Post
#
23
June 22nd 06, 09:54 PM posted to rec.radio.shortwave
RHF
Posts: n/a
"Combo" Antenna Splitter and {Active} Pre-Amplifier - When You Want To Use One Antenna With Two Receivers
wrote:
dxAce wrote:
Telamon wrote:
In article .com,
wrote:
Lisa Simpson wrote:
Can anyone recommend an antenna switch that allows me to hook up 2 SW
receivers to 1 antenna? Maybe a switch is not what I mean, as I'd like to
be able to receive on both receivers at the same time . . .
http://www.stridsberg.com/mca104a.htm
Stridsberg is the consumer grade gear most scanner enthusiasts use.
That's an active splitter for $185. Probably a good unit. I think DxAce
uses one.
Yep, Stridsberg is the one.
dxAce
Michigan
USA
- If you are going to use a splitter, you might as well go active.
- In either case (active or passive), you are going to get a bit
- more noise, but the active design should have better isolation.
For a "Combo" Antenna Splitter and {Active} Pre-Amplifier
when you want to use One Antenna with Two Receivers :
Then consider a Shortwave Receiver Antenna Tuner /
Pre-Amplifier that has a built-in Antenna Switch for
use with Two Radios and Two Antennas. The MFJ-959
Pre-Amplifier and Antenna Tuner comes to mind.
http://www.universal-radio.com/catal...amps/2574.html
READ - One Antenna and Two Radios = One Antenna Switch ?
http://groups.yahoo.com/group/Shortw.../message/10245
http://groups.google.com/group/rec.r...3d96b7a4b7af4b
hope this helps - iane ~ RHF
Reply With Quote