Thread
:
antenna switch?
View Single Post
#
24
June 22nd 06, 10:15 PM posted to rec.radio.shortwave
Telamon
Posts: n/a
"Combo" Antenna Splitter and {Active} Pre-Amplifier - When You Want To Use One Antenna With Two Receivers
In article .com,
"RHF" wrote:
wrote:
dxAce wrote:
Telamon wrote:
In article .com,
wrote:
Lisa Simpson wrote:
Can anyone recommend an antenna switch that allows me to hook up 2
SW
receivers to 1 antenna? Maybe a switch is not what I mean, as I'd
like to
be able to receive on both receivers at the same time . . .
http://www.stridsberg.com/mca104a.htm
Stridsberg is the consumer grade gear most scanner enthusiasts use.
That's an active splitter for $185. Probably a good unit. I think DxAce
uses one.
Yep, Stridsberg is the one.
dxAce
Michigan
USA
- If you are going to use a splitter, you might as well go active.
- In either case (active or passive), you are going to get a bit
- more noise, but the active design should have better isolation.
Snip
More money, more complicated but the amplification can mitigate loss of
signal and provide more isolation between outputs.
--
Telamon
Ventura, California
Reply With Quote