How to calculate increase of home wireless router range?
Don K wrote:
"John - KD5YI" wrote in message news:XLQrg.2896$bd4.372@trnddc01...
Rod Speed wrote:
A receive antenna has no EIRP, it doesnt radiate any real power.
Actually, when properly matched, it radiates half the received power.
How do you get that?
If the receiver input impedance is matched to the antenna, all the
received power is absorbed. There is no reflection. There is no radiation.
If the receiver matching is for optimal noise figure, there may be
some reflection and reradiation, but there's nothing pinning it to
be half the received power.
John is correct. A receiving antenna, when matched, reradiates half the
power it receives. An impinging field induces current in the antenna.
This causes radiation, just like the current in a transmitting antenna.
As it turns out, when the antenna is matched, the amount of power
radiated equals the amount of power delivered to the load, and that's
the best you can do. If you'd like a more in-depth and mathematical
explanation, you can find it in any antenna text, often discussed as
"scattering".
If a receiving antenna did absorb all the impinging power, it would be a
lot easier to make a shield or a stealth aircraft.
Roy Lewallen, W7EL
|