On Tue, 07 Oct 2003 10:49:50 -0500, Cecil Moore
wrote:
Richard Clark wrote:
If you choose to put forward a variant employing reactance, you could
at least step up to the bench to offer confirmatory or rejecting
evidence as I did.
OK, here's an interesting data point. I adjusted my IC-756PRO for 5W
output on 7.2 MHz using the following circuit.
7.2MHz 5W source---(+j442)---(-j442)---50 ohm dummy load
SWR meter at the dummy load read 5W forward with an SWR of 1:1
Then I installed the SWR meter between the coil and the cap. With 5W
supplied by the source, the forward power read 150 watts. Indicated
SWR was 3:1
Hi Cecil,
And so?
73's
Richard Clark, KB7QHC
|