On 9 Aug 2006 06:05:44 -0700, "N3" wrote:


Buck wrote:
On 9 Aug 2006 05:38:48 -0700, "N3" wrote:

I'm trying to tune a 2 mtr, 3 element beam that has a gamma match.
After connecting the coax to the driven element & adjusting the
matching unit, where should the coax exit in relation to the boom & the
elements? Should it travel along the boom or drop straight down next to
the driven
element? Any assistance concerning the above would be most appreciated.
Thank You.


I have always run mine below the boom to the mast and then down the
mast, into a drip loop and below the rotor, making sure there is
enough room to turn the rotor without stretching the coax out of the
drip loop.

Buck
N4PGW



I forgot to mention that this antenna is being used for 2 mtr FM. If i
drop the coax down vertically it will touch the driven element as well
as the matching unit.
--
73 for now
Buck
N4PGW

Drop it down the mast on the opposite side of the antenna element. I
know some element(s) are probably near the pole, but to one side of
it, but put the coax on the opposite side of the pole. There should
be no further interference with the signal than the pole already
offers.

Buck

--
73 for now
Buck
N4PGW