August 30th 06, 09:31 PM
posted to rec.radio.amateur.antenna
|
|
external usenet poster
|
|
First recorded activity by RadioBanter: Jul 2006
Posts: 233
|
|
Reg Edwards (G4FGQ)
Hi Walt,
The paths are tied intimately to my file system hierarchy (which is
pretty deep). Rather, I will give you a walk-thru. In spite of the
apparent complexity (it is a technician's tool), it is quite simple to
use with only two or three particulars to satisfy:
1. As directed on the front page, press the NEXT button;
2. On the next page for Project Name, enter Reg Edwards G4FGQ;
3. Below that (skip the category), click the ellipses button to open
a storage path and select an existing folder the website will be
stored here in a folder named Reg Edwards G4FGQ;
4. Press the NEXT button at the bottom;
5. leave the ACTION selection at "Download web site(s)";
6. past Reggie's top level page,
http://www.btinternet.com/~g4fgq.regp, into the Web Addresses text
box;
7. Press the NEXT button at the bottom;
8. At the next page, Press the FINISH button at the bottom.
This will start the robots harvesting with a view of them on a new
page that shows each robot in its own thread - about half a dozen of
them running simultaneously. Depending on the load at the server, the
entire process should take 5 minutes or so at T1 speeds. The total
download is 4.33MB.
The robot activity screen will disappear at the end of the harvesting.
I can zip up a copy (sorry Reg) and mail it for those who want a copy
that is located at the drive root (I did this down load again to
confirm the steps described above).
73's
Richard Clark, KB7QHC
Thanks, Richard, as Reg would say, "I'll give it a go."
Walt
|