Thread: Voltage/Current at the end of a dipole?
View Single Post
  #7   Report Post  
Old October 15th 03, 10:22 PM
Mark Keith
 
Posts: n/a
Default
(Mark Keith) wrote in message . com...
"Tom Sedlack" wrote in message The current max is at
the feedpoint. Just guessing on the voltage, probably about 700 volts
potential at the ends or so...x10 for a KW..
I had an E-mail that stated:


As P=V^2/R it follows V is proportional to the square root of P and
not directly proportional.

I was thinking the voltage for 1 kw would be in direct proportion. But
it seems not. 2100v? Thought I would throw this in. My original quote
may cause confusion. :/ MK
Reply With QuoteReply With Quote