HI:
GP300 / P110 Clone Program Cable ( Ex cond )
Tired of the alligator clips ?
Ever smoked / corrupted your radio with one ?
I have made a few " Premium Grade Clone Prorgam Cables "
for the P110 and GP300 ( Works on both of them )
The Battery Housing holds a Exact replacement Pogo Pin, a
9 Volt DC battery along with a Heavy Duty Industrial Battery
Snap has been added, in addition to the housing has had a
few special mods to " Prevent the pin from being damaged."
when this is used to " Secure " the Program fixture in place.
Which is generally what breaks since many times , that
mod is over looked.
A bit pricy, but designed to give years of service.
The use of " Hold on wires ", Alligator Clips, Rubber Bands, is a
sure way to corrupt a Radio Code Plug
A photo can be seen @
http://www2.4dcomm.com/metrotech/p110_c.jpg
95.00+6.50 Pirority Mail S & H ( Battery is included )
This just slides on just like the battery, but is
a program cable ( Requires Rib Box )
=====================================
Many other program cables made by request:
All very high quality ! ( Not all cables are made the same )
Want to see a few ?
This is some of the ones we have seen sold on some Auction Sites:
http://www2.4dcomm.com/metrotech/bad_cbl.jpg
This is how we make ours
http://www2.4dcomm.com/metrotech/my_cbl.jpg
X9000, Saber , Astro-Saber, XTS, MTS, HT1000 , HT600 / P200, Spectra
( High & Low Power ), Maxtrac / CDM . Pro Series, EX500 Series , and
just about any Motorola Cable !
We make cables that are equal to, or better than factory spec.
Please feel free to email me anytime
Monty